|
|
Coastal Lumber Dimension Mill The Coastal Lumber Dimension Mill building is located in Hazelton, less than 1 mile from the I-68 interchange Exit 29. The building is on a 17 acre lot. This 63,550 sq. ft. building has 43,400 sq. ft. of manufacturing space with 12' 11" ceilings at the eaves; 15,000 sq. ft. of warehouse space with 13' ceilings at the eaves and 1,600 sq. ft. of office space with 8" ceilings. The building has metal walls and roof, and a reinforced concrete floor. There are 6 truck docks in place and 3 drive-through bay doors - one 20' x 16' and two 16' x 14'. Parking space is available for 50 to 60 cars. Click here for a .pdf printable spec sheet that contains more information and pictures of the facility.
Kingwood Commercial Building This building is in a prime commercial location at the intersection of Route 26 and Route 7 in Kingwood. For more information contact Ben Harvey at (304) 329-1976. Valley Point Shop The Valley Point Shop is located off Route 26, just 6 miles south of Interstate68 exit 23. The property consists of 15.48 acres that houses an office building, a small shop, a large shop and a steel storage building. The office was built in 1975 and is a one story 1,270 sq. ft. brick building with electric heat and air conditioning. The small shop was built in 1975 and is a two story steel building with office/storage space, storage and garages. The first level has 7,440 sq. ft. and the second level has 3,000 sq. ft. The garage is 4,500 sq. ft with a ceiling height of 15 ft. 6 in. The garage also has 14 ft. 6 in x 14 ft. garage doors. The big shop was constructed in 1978 of steel. It has 12,000 sq. ft. with a 24 ft. x 17 ft. 6 in. furnace room addition. The garage doors are 18 ft. 6 in. wide by 18 ft. high. This building includes enerpac press, overhead crane and welder. The steel storage building is 48 ft. 6 in. by 70 ft. and is 30 ft. high. Also on this property are Thurman 25 ton portable truck scales with ILS digital display and one 75-ton and one 30-ton nitrate bin. |
